Home   Products   Installation   Request a Bid   Architect Specs   Radiant Heat Info   Contact Us   About Us   Site Map   FAQ   Warmzone.com

• PROJECTS Projects > New Jersey > Morganville - Snow Melting Asphalt Retrofit Resident in Morganville, New Jersey Two snow melting systems installed that cover approx. 600 sq. ft. Snow melting system retrofit into existing asphalt driveway The lines for the snow melting system are chalked out for the saw cutter - 1200 lin. ft. Click on images to enlarge A professional saw cutter cuts 1/4 inch wide and 1 to 1 1/2 inch deep grooves Backer Rod, a foam filler, is stuffed in the grooves to take up space between the cable and sealant The Tuff Cable is splice to the Cold Lead, which connects to the Control Units Half to one inch wide grooves are cut in the garage to run the Cold Lead to the Control Units - Gray concrete sealant is used in the garage to cover the Cold Leads Two Control Units (17" x 12" x 8" each) control the Snow Melting Systems - 240 V. 30 amp breakers are required to power each zone An aerial mounted snow switch is used to automatically turn on the snow melting systems when there is moisture in the air and the temperature is near freezing Blacktop sealant is used to seal the asphalt driveway and gray concrete sealant is used for the sidewalks and in the garage

© 2004-2008 Warmzone Media. All rights reserved. Various trademarks held by their respective owners. | Privacy Notice